Input voltage AC 100 - 240V
Power 70W
The power factor is more than 0.9
LED type 1W high power
LED number 70PCS
The luminous flux is greater than or equal to 5500LM
The color index is greater than or equal to 75Ra
Luminescence angle 120 degrees
Color temperature 2700-3500K, 4000-4500K, 5000-6500K
3 meter illuminance 155LUX
Working environment temperature -20 C - +50 C ''''
Storage temperature -40 C - +80 C ''''
30000 hours of life
Size 522*305mm
Die-casting aluminum
Packing material outer box + carton + sponge sleeve
Waterproof grade IP68
Wide application:
Urban roads, sidewalks, squares, schools, parks, courtyards, residential areas, factories and other places where outdoor lighting is needed.
The main features of the product:
(1) the characteristics of the LED street light itself - the one-way of light, no diffuse light, ensure the efficiency of light.
(2) the LED street lamp has two unique optical designs. It illuminates the LED street lamp''s light to the area needed to illuminate, and further improves the illumination efficiency, so as to achieve the purpose of energy saving.
(3) the efficiency of the light source of LED has now reached 100lm/W, and there is a lot of space for development, and the theoretical value is up to 250lm/W. The luminescence efficiency of the high pressure sodium lamp increases with the increase of power. Therefore, the overall light effect LED street lamp is stronger than the high pressure sodium lamp.
(4) LED street light color is much higher than that of high pressure sodium lamp, high pressure sodium lamp color index is only about 23, while the LED lamp color index reached more than 75, from the point of view of visual psychology, achieve the same brightness, illumination LED lamp can average 20% lower than high pressure sodium (with reference to the British sense of lighting standard);
(5) LED lamp light a small decline, a year decline of less than 3%, 10 years still reached the road illumination requirements, and high pressure sodium lamp failure, a year has decreased by more than 30%, therefore, LED lamps used in the design of power can be lower than high pressure sodium lamp;
(6) the LED street lamp has the automatic control energy saving device, which can realize the maximum possible power reduction and save the electric energy when it meets the requirements of different periods of lighting.
(7) the LED is a low voltage driving device, single LED safe voltage, series of single LED power is 1 watts, so it is safer than the use of high voltage power supply, especially suitable for public places (such as street lighting, industrial lighting, automotive lighting, commercial lighting etc.);
(8) each unit of LED is only a small size, so it can be made into various shapes, and it is suitable for a changeable environment.
(9) long life: it can be used for more than 50 thousand hours and provide three years of quality assurance;
(10) high light efficiency by more than 100LM above the chip, compared with the traditional high pressure sodium lamp can save 75%;
(11) the installation is simple: without buried cable without rectifier, directly to the street lamp installed in the lamp or light source connected to the original nested shell;
(12) excellent heat dissipation control: the temperature in summer is about 45 degrees, and the passive heat dissipation is used.
(13) the quality is reliable: the circuit power supply is all high quality components, each LED has a separate overcurrent protection, no need to worry about the damage;
(14) uniform light and color: no lens, not to improve the brightness of the uniform light color, so as to ensure that no aperture uniform color;