Detailed introduction:
Product features >
1. The appearance of the product is beautiful, and the induction head is not required.
2, the induction distance is large, the induction is sensitive, the uniformity is high, has no glare 3, the luminescence angle is big, the illumination is even 4, the intelligent induction, eliminates the manual operation the inconvenient 5, completely controls the microwave, the lamp follows the human luminescence 6, the ultra long life, ultra energy conservation (approximately 90%).
Application place >
24 hour lighting places, such as corridor, aisle, corridor, warehouse, underground parking lot, etc.
Technical parameters >
Model specification: SH-ZXD-10W
Power luminous flux: 800LM
Luminaire size: 300*H86mm
Delay time: 60 seconds
Induction type: microwave induction
Power: 10W
Induction range: 8 meters, 180 degrees
Corridor lighting description >
When you enter the living quarters at night or walk up part of the residential corridor, you will find that although there are lights on all the corridors, the corridor is very dark, which brings great inconvenience to your walking. After investigation and analysis, the main reasons are three: one is that some light and sound and light control switch quality is poor, and the use is bad soon. Two, the power supply voltage of some cities or living areas is unstable, and the lighting voltage at night is as high as 250 volts. The power consumption of lighting is greatly increased, and the service life of lighting is shortened. Three, after the lighting is broken, it is difficult to replace the lamp because of the high location of the lamp from the ground, resulting in a long term no replacement, resulting in no lighting of the corridor, and seriously affecting the image of the civilized city. And Zhong Xiang has been devoted to the research and development of intelligent lighting, which produced a special microwave induction lamp for the corridor.
Work principle >
Microwave induction is a passive human body detector. It controls the luminaire automatically by detecting the brightness of the surrounding environment and human movement, and quiet will not disturb the rest of others. In the evening, the switch is open in the detection range, and the switch is opened. When the person is away from the detection range, the switch is delayed for dozens of seconds and then extinguished, which greatly facilitates the control and management of lamps and lanterns in various public places, and achieves the best energy saving purpose.
The following is the detailed process:
1, No: Shenghua microwave induction LED ceiling lamps is micro bright state in the related area of no one, 2-3 watts of power.
2, someone: when people pass through the area that can be induced by microwave, the lamp will turn on automatically, the power is 10 watts.
3, after the person walks: when the person walks about 60 seconds, the microwave ceiling lamp automatically enters the dormancy state, the power is 2-3 watts. Technical indicators: scope: * induction hemisphere standard test range: 180 degrees, *, ordinary induction distance: distance 8M, the distance 10-20M. (custom) * source: Taiwan imported high brightness chip * whole lamp power: 10W* power factor: 80%* lamp performance: conform to 3C, CE, ROHS certification requirements of each suction lamp control independently, in accordance with the "standard for lighting design of buildings".